起源の場所:
中国
ブランド名:
Womala
証明:
.
モデル番号:
C2C20177
Product Overview
The C2C20177 outer tie rod end (left‑hand / track rod end) is a direct OEM‑equivalent replacement for the for Jaguar S‑TYPE (X200), XJ (X350), and XK (X150) models. This critical steering component connects the steering rack to the left‑front wheel hub, translating steering input into precise wheel movement. Worn tie rod ends cause loose steering, uneven tyre wear, or clunking noises – replace to restore precise steering control and vehicle safety.
Key Features
| Feature | Benefit |
|---|---|
| Precision ball joint design | Smooth, responsive steering with minimal play |
| Left‑hand (driver side) specific | Correct side‑specific geometry |
| OEM‑spec direct fit | Bolt‑on replacement – no modifications |
| M14x1.5 thread | Matches factory specification |
| 18‑month warranty | Comprehensive quality guarantee |
Technical Specifications
| Specification | Detail |
|---|---|
| Part Number | C2C20177 |
| Product Type | Outer Tie Rod End / Track Rod End |
| Position | Front Left (Driver Side – LHD) |
| Thread Size | M14 x 1.5 |
| Length | 188 – 210 mm |
| Housing Material | Steel, precision‑forged |
| Includes | Tie rod end with nut |
OE Cross‑Reference
| Brand | OE Numbers |
|---|---|
| for Jaguar | C2C20177 |
| for Jaguar | C2C35783 |
| for Jaguar | C2C8371 |
| for Jaguar | C2C020177 |
C2C20177 is the primary part number – all listed OE numbers are interchangeable for this left‑hand outer tie rod end-.
Vehicle Fitment (Front Left – Driver Side)
| Model | Chassis | Years | VIN Notes |
|---|---|---|---|
| S‑TYPE | X200 | 1999 – 2008 | All models |
| XJ | X350 | 2003 – 2009 | From VIN G00442 to H32732 |
| XK / XKR | X150 | 2006 – 2014 | From VIN B00379 |
Engine Compatibility:
S‑TYPE: All models (1999‑2008)
XJ / XJR: All models (2003‑09)-
XK / XKR: All 4.2L V8 models (2006‑09)
⚠️ Front left (driver side) only – front right requires C2C20176-. Verify with VIN.
Common Failure Symptoms
| Symptom | Indication |
|---|---|
| Loose or vague steering feel | Worn ball joint in tie rod end |
| Clunking or knocking from front end | Worn or loose tie rod end |
| Uneven or rapid tyre wear | Excessive play causing misalignment |
| Vehicle pulls to one side | Failed steering linkage component |
| Vibrations in steering wheel | Worn ball joint allowing movement |
⚠️ Mandatory VIN Verification
Fitment varies by model year, VIN range, and production date. Always provide your 17‑digit VIN to our team for guaranteed compatibility – we verify each order to avoid mismatches.
Installation Note: When replacing tie rod ends, always replace them in pairs (both sides simultaneously) and perform a wheel alignment immediately after installation-.
Why Source From Us
10,000+ SKUs – extensive stock for fast dispatch
18‑month warranty – full coverage against defects
B2B wholesale pricing – volume discounts available
Expert VIN support – we handle cross‑referencing for you
Contact us for bulk orders or VIN‑checked quotes.
Specifications subject to change; images for reference only.Aftermarket replacement – not affiliated with Jaguar Land Rover.
Frequently Asked Questions
A: Signs of a failing bumper bracket include visible damage or deformation, misaligned bumper panels, unusual noises from the front end, or if the bumper appears loose or sagging on one side.
A: For optimal results, we recommend professional installation. Key considerations include ensuring proper alignment of all mounting points, checking for additional damaged components, and verifying all fasteners are properly torqued to specification.
問い合わせを直接私たちに送ってください.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski